TCS-200 Series Analog Controls
The TCS-200 is a manual analog control for the Electro Disc Tensioning Brake. The control is a constant-current output type that uses a front panel or remote potentiometer to adjust the output. The TCS-200-1/-1H is a manual analog control for any 24 VDC tension brake. It can also accept a 0-10 VDC or 4-20mA analog input for adjusting the output.
Features
- TCS-200 Tension Control
- Input: 24–30 VAC, 50/60 Hz
- Output: 0-270 mA continuous per magnet up to 12 electro disc magnets, adjustable 3.24 amps
- Torque adjust, brake on, run, brake off switch on front panel
- Remote torque adjust, roll follower inputs
- Input: 115/230 VAC, 50/60 Hz
- Output: 0-24 VDC adjustable, 4.25 amps continuous
- Torque adjust, brake on/off, run switch
- Remote torque adjust, roll follower inputs
- Input: 115/230 VAC, 50/60 Hz
- Output: 0-24 VDC adjustable, 5.8 amps continuous
- Torque adjust, brake on/off, run switch
- Remote torque adjust, roll follower, analog voltage or current option
- Regal Rexnord - Australia (Sydney)
- Sydney New South Wales
- Unit 1, 11 Penny Place
- Arndell Park, NSW. 2148
- Email: [email protected]
- Phone: 1300 25872 6(68466)
- Regal Rexnord - Australia (Melbourne)
- Melbourne Victoria
- Suite 36, Level 2/222 Lonsdale Street
- Melbourne, VIC 3000
- Email: [email protected]
- Phone: 1300 25872 6(68466)
- Regal Rexnord - Australia (Mackay Queensland)
- Mackay Queensland
- 14/20-34 Caterpillar Drive
- Paget, QLD 4740
- Email: [email protected]
- Phone: 1300 25872 6(68466)
- Regal Rexnord - Australia (Perth)
- Perth Western Australia
- 271 Great Eastern Highway
- Belmont, WA 6104
- Email: [email protected]
- Phone:1300 25872 6(68466)